Overview:
A self-checking flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.
Features:
- Designed for use with 7800 series controls with the R7851C flame amp.
- Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the solid state UV sensor checking function.
- Can be mounted horizontally, vertically or at any angle in between.
- The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
- Models available with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
- C7961E1022 or E1030 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
- Incorporates UV sensor tube checking feature; used with R7851C1008 Dynamic Self-check Amplifiers.
- Protective heat block built into mounting flange.
- -40 F (-40 C) rated ultraviolet sensing cell is supplied.
- C7961E meets NEMA 4 standards with viewing window rated to 20 psi.
- C7961F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.Includes:Quartz Viewing Window rated for 20 psi (138 kPa)
Доступные для заказа модификации:
Модификация | Артикул |
---|---|
C7961E 1006 (U) | C7961E1006/U |
Вы можете купить датчик пламени Honeywell C7961E оставив заявку на сайте.
Если вам нужна помощь в выборе Датчиков Датчиков пламени серии C7xxx или другого оборудования Honeywell, обратитесь к нашему техническому специалисту. Это можно сделать:
- по электронной почте master_alfa@bk.ru;
- по телефону +7 (916)056-46-46, +7 (977)946-32-60.
Доставку оборудования Honeywell мы производим любой транспортной компанией во все регионы РФ. Самостоятельно забрать выбранный вами товар можно на нашем складе по адресу: г.Москва, Вашутинское шоссе, владение 38.